• Model: 201
• Serial: G6181710GK

FEATURES - This used bagger from Rennco is capable of running several unsupported centerfold roll stock materials including:

• Polyethylene, P.V.C., and several types of shrink film will work with this used Rennco bagger.
• Thickness of materials can range from 75 gauge to 4 mil with a 3” core diameter.
   
• Bag changeover on this used bagging equipment requires no change parts and is accomplished by simply changing the roll
  
  stock material to the desired width and turning the vertical adjusting wheel for the desired package length (up to 14”).
• Analog temperature controllers for Vertical and Horizontal Seal Blades.
• GE Fanuc Series ONE Junior Programmable Logic Controller.
• This used Rennco bagger include an exhaust blower.
• VOLTAGE: 120 Volt AC / Single Phase / 9 Amps.
• AIR PRESSURE: 80 P.S.I. at .19 S.C.F.M.
• CYCLE RATE: 5 to 60 Packages / min. depending on package size, material and product.
• SEAL AREA: Maximum vertical 14” / Maximum horizontal 20”
• JAW OPENING: Maximum 4.25”

 View other used baggers from Wright Packaging.